Feed dog
17.4 Setting the stroke movement of the feed dog
Proper setting
When the needle tip reaches the needle hole, the ascending and
descending tooth points of the feed dog should be level with the throat
plate.
Cover
• Remove the oil collection tray (2) ( p. 25).
• Remove the grease cap (1) ( p. 26).
Fig. 85: Setting the stroke movement of the feed dog (1)
(1) - Grease cap
(2) - Oil collection tray
To set the stroke movement of the feed dog:
1. Tilt the machine head ( p. 19).
2. Loosen the screw (3).
3. Lock the machine in place at position B.
Service Instructions 195 - 00.0 - 12/2017
WARNING
Risk of injury!
Crushing, cutting and punctures are possible.
Only set the stroke movement of the feed dog when
the machine is switched off.
①
②
③
(3) - Screw
85