Sewing feet
8.2 Setting the stroke adjusting range and the timing of the
Fig. 51: Setting the stroke adjusting range and the timing of the feeding foot stroke
movement (1)
(1) - Gage (gage 9,
(2) - Block
Service Instructions 195 - 00.0 - 12/2017
feeding foot stroke movement
WARNING
Risk of injury!
Crushing, cutting and punctures are possible.
Only set the stroke adjusting range and the timing
of the feeding foot stroke movement when the
machine is switched off.
NOTICE
Property damage may occur!
Damage to the machine.
Ensure that the eccentric is at its initial position: The slot must be
horizontal in the upper semicircle.
①
②
p. 14)
(3) - Screw
(4) - Stroke rocker
④
③
55