3.5 Flats on shafts
Fig. 2: Flats on shafts
(1) - Flat
Some shafts have flat surfaces at the points where the components are
screwed on. This stabilizes the connection and makes setting easier.
Important
Always ensure that the screws are completely flush with the surface.
3.6 Locking the machine in place
Fig. 3: Locking the machine in place (1)
(1) - Locking peg
(2) - Locking opening
16
①
②
(2) - Shaft
①
②
(3) - Handwheel
Working basis
③
Service Instructions 195 - 00.0 - 12/2017