Table of Contents
Advertisement
S5-115U Manual
Introduction
The following pages contain information to help you familiarize yourself with the manual.
Description of contents
The contents of the manual can be broken down subject-wise into a number of blocks:
•
Description
(System overview, technical description)
•
Installation and operation
(Installation guidelines, system start-up and program test, fault diagnostics, addressing)
•
Programming instructions
(Introduction to STEP 5, STEP 5 operations)
•
Special capabilities
(Analog value processing, integral blocks, communications)
•
Technical specifications overview
You will find additional information in tabular form in the appendices.
Please use the forms at the back of the manual for any suggestions or corrections you may have
and return the forms to us. This will help us to make the necessary improvements in the next
edition.
Training courses
Siemens offer comprehensive training facilities for users of SIMATIC S5.
Details can be obtained from your nearest Siemens office or representative.
Reference literature
The manual contains a comprehensive description of the S5-115U. Subjects that are not specially
related to the S5-115U have only been treated in brief, however. More detailed information is
available in the following literature:
•
Programmable controls
Volume 1: Logic and sequence controls; from the control problem to the control program
Günter Wellenreuther, Dieter Zastrow
Brunswick 1987
Contents:
- Theory of operation of a programmable control system
- Theory of logic control technology using the STEP 5 programming language for SIMATIC S5
programmable controllers.
Order No.: ISBN 3-528-04464-0
EWA 4NEB 811 6130-02b
Introduction
xvii
Advertisement
Table of Contents
