Stereo/Crossdelay - Korg KROSS Parameter Manual

Effect Guide
High Damp [%]
Low Damp [%]
These parameters set the damping amount of high range and low
range. The tone of the delayed sound becomes darker and lighter
as it feeds back.
Spread
This parameter sets the pan width of the effect sound. The stereo
image is widest with a value of 50, and the effect sound of both
channels is output from the center with a value of 0.

090: Stereo/CrossDelay

This is a stereo delay, and can by used as a cross-feedback delay
effect in which the delay sounds cross over between the left and
right by changing the feedback routing.
Stereo In - Stereo Out
Left
Input Level D-mod
Stereo/Cross
Input Level D-mod
Right
Paramter
←
Mode
L Dl[ms] L Delay [ms] 0.0...274.0
R DL[ms] R Delay [ms] 0.0...274.0
L Feedbck L Feedback
Src Source
Amt Amount
R Feedbck R Feedback
Amt Amount
High Damp
HiDamp[%]
[%]
Low Damp
LoDamp[%]
[%]
Input Level
InLvl Dmod
Dmod [%]
Src Source
←
Spread
←
Wet/Dry
Src Source
Amt Amount
266
High Damp Low Damp
Delay
Feedback
Spread
High Damp Low Damp
Delay
Stereo/Cross
Value Explanation
Switches between
Stereo, Cross stereo delay and
cross-feedback delay
Sets the delay time
for the left channel
Sets the delay time
for the right channel
Sets the feedback
–100...+100 amount for the left
channel
Selects the
Off...Tempo modulation source of
feedback amount
Sets the modulation
–100...+100 amount of the left
channel feedback
Sets the feedback
–100...+100 amount for the right
channel
Sets the modulation
–100...+100 amount of the right
channel feedback
Sets the damping
0...100 amount in the high
range p.266
Sets the damping
0...100 amount in the low
range p.266
Sets the modulation
–100...+100 amount of the input
level p.261
Selects the
modulation source
Off...Tempo
for the input level
p.261
Sets the width of the
–50...+50 stereo image of the
effect sound p.266
Sets the balance
Dry, 1 : 99...
between the effect
99 : 1, Wet
and the dry input
Selects a modulation
Off...Tempo
source for Wet/Dry
Sets the modulation
–100...+100
amount for Wet/Dry
091: St. Multitap Delay (Stereo
Multitap Delay)
The left and right Multitap Delays have two taps respectively.
Changing the routing of feedback and tap output allows you to
create various patterns of complex effect sounds.
Stereo In - Stereo Out
Left
Input Level D-mod
Input Level D-mod
Right
Paramter
Wet / Dry
←
Mode
High Damp
Hi Damp[%]
[%]
Low Damp
Lo Damp[%]
[%]
Wet / Dry
Tap1
Tap1[ms]
Time [ms]
Tap1 Level Level
Tap2
Tap2[ms]
Time [ms]
Tap2
Fback(T2)
Feedback
Src Source
Amt Amount
Input Level
InLvl Dmod
Dmod [%]
Src Source
←
Spread
Src Source
Amt Amount
←
Wet/Dry
Src Source
Amt Amount
Mode: Normal
Mode
You can change how the left and right delay signals are panned by
modifying the routing of the left and right delay as shown in the
figure above. You need to input different sounds to each channel in
order for this parameter to be effective.
Feedback
Delay
(2)
(1)
High Damp Low Damp
Mode Spread
Mode Tap1 Level
High Damp Low Damp
(1)
(2)
Delay
Feedback
Value Explanation
Normal,
Cross Switches the left and
Feedback, right delay routing
Cross Pan1, p.267
Cross Pan2
Sets the damping
0...100 amount in the high
range
Sets the damping
0...100 amount in the low
range
Sets the Tap1 delay
0.0...274.0
time
Sets the Tap1 output
0...100
level
Sets the Tap2 delay
0.0...274.0
time
Sets the Tap2
–100...+100
feedback amount
Selects the
modulation source of
Off...Tempo
the Tap2 feedback
amount
Sets the modulation
–100...+100 amount of the Tap2
feedback amount
Sets the modulation
–100...+100 amount of the input
level
Selects the
modulation source
Off...Tempo
for the input level
p.261
Sets the width of the
stereo image of the
–100...+100
effect sound
Selects the
modulation source of
Off...Tempo
the effect sound's
stereo image width
Sets the modulation
amount of the effect
–100...+100
sound's stereo image
width
–Wet... Sets the balance
–99 : 1, Dry, between the effect
99 : 1...Wet and the dry input
Selects a modulation
Off...Tempo
source for Wet/Dry
Sets the modulation
–100...+100
amount for Wet/Dry
Mode: Cross Feedback Mode: Cross Pan1
Wet / Dry
Tap1=(1)
Tap2=(2)
Wet / Dry
p.266
p.266
p.267
p.261
p.266
Mode: Cross Pan2