Korg KROSS Parameter Manual page 148

Sequencer mode
In Measure, specify the beginning measure of the copy desti-
nation.
Note: Track 1 of all sixteen preset template contains a drum
category program.
The pattern names of the preset patterns indicate the musical
genre and part of the optimal drum category program.
By loading the drum track for these preset template songs and
the corresponding preset patterns, you can efficiently set up a
drum track that is suited to each preset template song.
When you execute, Measure will count up automatically. You
may then copy patterns as well. To exit the command, press the
Exit button.
For details on how to copy preset patterns to a song along with the
preset template song, please see "Using template songs" on
page 59 of the Operation Guide.
Save Template Song
(Save as User Template Song)
Save Template Song is available on all of the tabs under the SEQ,
S–INPUT/CTRL, S–LOOP/TONE, S–TRACK, S–ZONE/
DELAY, S–MIDI FILTER, S–ARP, S–DRUM TRACK, S–STEP
SEQ, S–FX ROUTING pages.
This command saves the program selections, track parameters, and
effect settings etc. of the current song as a user template song
U00–15. The settings you save here can also be loaded in Song
Play mode.
1. In To, specify the user template song (U00–15) where the
data will be saved.
Be aware that when you execute this command, all settings of
the destination Template will be erased and rewritten with the
current settings.
Note: The Play Loop settings are not saved. If you want to save
these setting, execute Save SEQ in Media mode and save them to
an SD card.
140