Korg KROSS Parameter Manual page 185

2. If you selected Program, Combination, Drum Kit, or
Arpeggio Pattern as the Kind, specify the range of data that
you want to load.
All: load all data
Bank: load an individual bank
Single: load one item of data
3. If you're loading Bank or Single, use To to specify the load-
ing-destination.
Change all bank references
Change all bank references is available on the GLOBAL pages.
This function changes all program banks specified for timbres in
combinations or tracks of songs.
1. If you wish to change bank references for combinations,
check Combination.
If you wish to change bank references for songs, check Song.
2. In Program Bank, specify the replacement for each bank.
If you change two or more different banks to the same bank,
it will not be possible to use this function to change them
back to different banks. Be careful that the change destination
banks do not overlap.
Half Damper Calibration
Half Damper Calibration is available on the GLOBAL pages.
If a damper pedal that supports half damper (the DS–1H option) is
connected to the DAMPER jack, here's how you can adjust the
sensitivity if the damper effect is not applied appropriately.
Since the half-damper pedal is highly sensitive, please use the
optional DS–1H. Other pedals may not produce the
appropriate effect, or may be impossible to calibrate
correctly.
1. Connect a half-damper pedal to the DAMPER jack.
2. Select "Half Damper Calibration" to open the dialog box.
3. Press the half-damper pedal, and then release your foot
from the pedal.
4. Press the Done button.
If the adjustment could not be performed correctly, an error
message will be displayed. Please perform the procedure once
again.
Global, Media: FUNCTION Change all bank references
Update System Software
Update System Software is available on the GLOBAL pages.
Here you can update the KROSS system.
You can download the latest system file onto your computer from
the Korg website (http://www.korg.com/). For details, please see
the Korg website.
Before you begin the system update, you should back up your
important data on an SD card.
1. Insert the SD card containing the system file into the SD
card slot of the KROSS.
Note: For details on how to copy the system file to your SD card,
please see the explanation on the download page of the Korg
website.
2. Access the GLOBAL> BASIC page.
3. Select "Update System Software" to open the dialog box.
4. Press the OK button to execute the update.
A dialog box will ask you for confirmation. Press the OK button to
begin updating the system software.
Note: If an error message of "File/path not found" appears, press
the OK button and proceed again from step 1.
While the system is being updated, do not touch the KROSS'
buttons, and never turn off the power. If the power is
accidentally turned off while the system is being loaded, the
KROSS may become inoperable. If this occurs, please
contact your local Korg distributor.
5. When the update has been completed, a dialog box with the
following message will appear.
The system update has now been installed. To complete the
process, you must now restart the KROSS. Please turn the power
off, and then on again.
"Completed. Please turn the power off, and then on again."
6. Power-off the KROSS. Wait for several seconds, and then
turn the power on again.
Note the system version that is displayed in the lower right of the
opening screen.
177