Korg KROSS Parameter Manual page 191

13) Load an Arpeggio Pattern
The selected user arpeggio pattern data will be loaded into the user
arpeggio pattern number that you specify as the loading
destination.
1. If you wish to load a user arpeggio pattern other than the
currently selected one, use "From" (upper field) to re-select
the user arpeggio pattern that you wish to load.
The selected user arpeggio pattern can be played from the
keyboard even before you load it. This is convenient when you
want to audition the user arpeggio pattern you wish to load.
2. In "To" (lower field) specify the loading destination user
arpeggio pattern.
14) Load Global Setting
Global setting data in the .PCG file will be loaded.
This includes Global mode parameters other than drum kits and
arpeggeio patterns.
Memory protect and Effect Global SW settings will not be
loaded.
15) Load Favorite
All Favorite data in the PCG file will be loaded.
16) Load .SNG
All data in the .SNG file will be loaded.
Use Select .SNG Allocation to specify how the song data from the
.SNG file will be loaded.
Append: The song will be loaded after the last song data that
already exists in internal memory. At this time, the song data in the
.SNG file being loaded will be packed forward. (See diagram
below)
Select this when you want to add song data from media without
erasing the song data that currently exists in internal memory.
Clear: All song data currently existing in internal memory will be
erased, and song data will be loaded in the state in which it was
saved (See diagram below).
Select this when you want to reproduce the saved state
immediately after power-on, etc.
Global, Media: FUNCTION Load selected
.SNG Allocation
Internal memory of
.SNG file to load
the KROSS after loading
SNG000
SNG001
SNG003
Append
SNG005
SNG000
SNG001
SNG003
Clear
SNG005
17) Load a Song
Data for the selected song will be loaded into the song number you
specified as the load destination.
1. If you wish to load a song other than the selected song, use
"From" (upper field) to re-select the song to be loaded.
2. In "To" (lower field), select the loading destination song.
18) Load Tracks
The event data of all tracks in the selected song will be loaded into
the song you specify as the loading destination. However, it is not
possible to specify an uncreated song as the loading destination.
In Song, specify the loading destination song.
19) Load Standard MIDI File
The selected Standard MIDI File will be loaded into the song
number you select as the loading destination.
In To, select the loading destination song.
Note: Any System Exclusive messages or Universal Exclusive
messages included in the SMF data will not be loaded.
If this is On (checked), System Exclusive messages and Universal
Exclusive messages included in the SMF data will be loaded as
System Exclusive events.
The GS/XG sound maps and messages are not supported.
Depending on the contents of the data, there may be cases in
which it will not play back correctly.
If you select an undefined file and choose Load selected, the
file will be assumed to be a Standard MIDI File, and the
Load Standard MIDI File dialog box will appear. When you
execute loading, the file will be loaded into the song that was
specified as the loading destination. However if the file
Internal memory of
the KROSS before loading
SNG000 SNG000
SNG002
SNG002
SNG003 SNG003
SNG004
SNG005
SNG006
SNG007
SNG000 SNG000
SNG001
SNG002
SNG003 SNG003
SNG005
183