File - Korg KROSS Parameter Manual

6–1: FILE
Use the cursor buttons     to select the desired file or directory,
and then execute the Load Selected function. (see page 176)
Here you can also save various data from internal memory to
media. Execute the appropriate Save function. (see page 184)
Save functions can be executed in the same directory as the
.PCG or .SNG file.
The KROSS does not contain an internal calendar or clock, you
must use Utility function Set Date/Time to set the date and time
before saving the file.
Media
This shows the type and volume label of the inserted device.
Volume label:
No Label: Media that has no volume label
Unformatted: Media that has not been formatted
No Media: Media is not inserted in the card slot.
The volume label display will depend on the inserted media and
the page.
PCG Preview
If you selected just a single program, combination, or drum kit
from within a .PCG file (i.e., from an opened bank), you can listen
to the sound directly from the media without having to load the
file. If you've selected a combination, the timbres in the
combination will use the KROSS's internal programs. In the case
of a user drum kit, the sound parameters of the program that was
selected before entering Media mode will be used.
Current Directory
The directory currently selected for processing is referred to as the
"current directory."
To move from the current directory to a different level, use the
cursor buttons  and .

File

Data
Index File
Type Type
Index
This is a number attached to the file.
File Type
This is an icon that represents a file or directory.
Data Type
This icon represents the type of data, such as PCG, SNG, or WAV.
File
This is the low-level DOS file name.
Size
This is the size of the file, in bytes.
Date
This is the date and time when the file was saved. From the left,
this is shown as day, month, year, hours and minutes.
Size Date
However since the KROSS does not contain an internal calendar
or clock, you must use Utility function Set Date/Time to set the
date and time before saving the file.
6–2: UTIL (File Utility)
Here you can rename, copy, or delete the selected media or file,
create a new directory, format, and set the date and time.
After selecting media or a file, select the desired function.
6–3: EX-PCM
Total
Shows the total expansion sample memory capacity.
128 MB is the maximum free capacity. (When calculated as 48
kHz, 16-bit linear data)
Free
The size of the free area is shown as a number of bytes and as a
percentage (%).
Status bar
The expansion sample memory usage is shown graphically.
EX: The option PCM data area that has been loaded.
USER: The PCM data area that was created by the Pad Sampler
function Convert Current Bank to Program.
Free: The free area.
Loaded PCM List
Title
This shows the titles of the option PCM and user sample data that
has been loaded in Media mode.
Size
This shows the amount of PCM that has been loaded.
6–4: INFO (Media Information)
The MEDIA screen shows information about the media.
Volume Label: The volume label of the media.
Device ID: The assigned device ID.
6: MEDIA 6–1: FILE
175