Korg KROSS Parameter Manual page 190

Global/Media mode
5) Load Combinations
All combinations in the .PCG file will be loaded.
6) Load Combination Bank
All combinations in the selected bank will be loaded into the bank
you specify.
In To, select the loading destination bank.
The load-destination can only be bank U or the same bank as
the load-source bank.
7) Load a Combination
This loads the selected Combination into a specified Bank and
number in internal memory.
1. If you wish to load a combination other than the one
already selected, use "From" (upper field) to select the
combination that you wish to load.
Note: The selected combination can be played from the keyboard
even before you load it. This is convenient when you want to
audition the combination before loading it. For more information,
please see the "PCG Preview" section on page 175.
2. In "To " (lower field), select the bank and combination
where the data will be loaded.
The load-destination can only be bank U.
8) Load Drum Kits
All drum kits in the .PCG file will be loaded.
182
9) Load Drum Kit
This function loads all drum kit data from the selected drum kit
bank into the drum kit bank that you specify as the load-
destination.
[Bank A, B, C, UA...UD]
In To, select the loading destination bank.
10) Load a Drum Kit
The selected drum kit will be loaded into the drum kit number you
specify as the loading destination.
1. If you wish to load a drum kit other than the one already
Note: The selected drum kit can be played from the keyboard even
before you load it. This is convenient when you want to audition
drum kits before loading. For more information, please see the
"PCG Preview" section on page 175.
2. In To "To" (lower field), select the loading destination
11) Load Arpeggio Patterns
All user arpeggio pattern data in the .PCG file will be loaded.
12) Load Arpeggio Pattern
All user arpeggio pattern data in the selected user arpeggio pattern
bank will be loaded into the user arpeggio pattern bank you specify
as the loading destination.
In To, select the loading destination user arpeggio pattern bank.
If you execute this function with U1024–1279(USER) specified as
the loading destination for the selected user arpeggio pattern bank
0000–1023(INT), user arpeggio patterns 0000–0255 will be
loaded. If you select 0000–1023(INT) as the loading destination
for U1024–1279(USER), the data will be loaded into user
arpeggio patterns 0000–0255.
[000–041(INT), 042–057(USER)]
If you've selected (USER) as the load-destination for the
selected drum kit bank (INT), 000–015 will be loaded. If
you've selected (INT) as the load-destination for (USER), the
data will be loaded into 000–015.
selected, use "From" (upper field) to re-select the drum kit
you wish to load.
drum kit.
[U0000...1023(INT), U1024...1279(USER)]