Setup-Stream Menu; Table 7-8: Stream Properties - Teledyne 465L Operation Manual

Teledyne API Model 465L O 3 Monitor Operation Manual

7.2.7. SETUP-STREAM Menu

The STREAM menu allows the operator to view and edit properties of each
measurement stream available.
available:
Property
DURATION
HI ALARM
HIHI ALARM
ON/OFF HI
ALARM
ON/OFF HI HI
ALARM
RANG
ENABLE
*
For low concentration instrument ranges. For certain range configurations, the
alarms may be set to higher values
50

Table 7-8: STREAM Properties

Meaning
Stream measurement duration for
AUTO stream-selector operation.
See Section 7.3 for additional
details.
HI alarm trigger value
HI-HI alarm trigger value
HI alarm enable, enables HI alarm
operation
HI-HI alarm enable, enables HI-HI
alarm operation
Concentration range for specified
stream. Used to scale the analog
output.
Allows the choice of viewing or
skipping each stream in a multi-
channel instrument when cycling
through the streams in Auto or
Manual modes. OFF = skip. At
least one stream must be set to ON
(enabled).
Teledyne API Model 465L O
For each stream the following properties are
Default
Value
60.0 Seconds
0.100 PPM
0.300 PPM
ON
ON
1.0 PPM
ON
Monitor Manual
3
Range
60.0 – 360.0
Seconds
.010 – 9.999
*
PPM
.010 – 9.999
*
PPM
ON/OFF
ON/OFF
1.0 – 500.0
PPM
ON-OFF
05509G DCN6806