Sample Gas Connection; Figure 4-3: Pneumatic Connections, Nema Configuration, Single Stream; Figure 4-4: Pneumatic Connections, Nema Configuration, Multi-Stream - Teledyne 465L Operation Manual

Teledyne API Model 465L O 3 Monitor Operation Manual

Figure 4-3: Pneumatic Connections, NEMA Configuration, Single Stream

Figure 4-4: Pneumatic Connections, NEMA Configuration, Multi-Stream

4.3.1. Sample Gas Connection

Sample gas connections are made to the ¼" tube fittings on the rear panel. For
single stream monitors, use the fitting labeled "Sample Inlet." For multi-stream
monitors, the sample tubing is connected to the fittings labeled Stream 1, Stream 2,
etc (See Figure 4-2, Figure 4-3, Figure 4-4)
22 Teledyne API Model 465L O
3
Monitor Manual 05509G DCN6806