Powerbox Menu; Introduction; Navigating Through The Powerbox Menu; Padlocked Menu Items - Teledyne CP Series User Manual

User Manual
CP Series
Version 3.1 – June 2020

5. POWERBOX MENU

5.1 I
NTRODUCTION
The secondary display (2) provides the user with an interface to the
PowerBox extended functionalities and advanced user options.
Each feature will be explained in the following chapters.
5.1.1 N
AVIGATING THROUGH THE
To navigate through the PowerBox menu, use the menu navigation keys
(15).
Use the UP and DOWN arrow keys to browse through the menu items.
Press OK or ENTER key (13) to select a function and BACK arrow or CANCEL key (14) to go up one level
in the menu structure.
Use the Alphanumeric keys (7) to enter numeric or text values and confirm with the OK or the ENTER key
(13). If you wish to clear the input press the BACK arrow or CANCEL key (14).
5.1.2 P
ADLOCKED MENU ITEMS
Certain menu items are locked, which means they cannot be changed or accessed. In the
PowerBox menu, these items are preceded by a padlock symbol.
There are 2 reasons an item can be locked:
1. The item refers to the CP SERIES generator and this one is not connected to the PowerBox.
Connect the generator to have access to this item.
2. The item is password protected; enter the appropriate password to unlock the item.
Note: There are 3 types of password:
• The superuser password which give access to the Settings menu
The Exposure calculation code which unlock the Exposure calculation software
•
The ICM password which give access to the ICM functions menu
•
Once the Exposure calculation code is entered, the exposure calculation software is unlocked permanently.
Once the superuser or the ICM password is entered the corresponding items are unlocked until the
PowerBox is switched OFF. By default, superuser password is "000000" (six times zero
P B
OWER OX MENU
MAIN MENU
Exposure calculation
Memory access
Settings
All measures
Data access
Errors
Demo mode OFF
ICM functions
37