Determining A Dynamically Assigned Ip Address (Dhcp Mode); Manually Assigning A Static Ip Address - Teledyne 465L Operation Manual

Teledyne API Model 465L O 3 Monitor Operation Manual
8.5.3. Determining a Dynamically Assigned IP Address
(DHCP Mode)
The DeviceInstaller software application (See Section 8.5) can be used to search a
network for instruments and determine the IP Address assigned by a DHCP server.
1. Click Start->Programs->Lantronix DeviceInstaller->DeviceInstaller.
If your PC has more than one network adapter, a message displays. Select an
adapter and click OK.
2. Click on the Search icon. After a moment a list of instruments on the
network will be displayed. The 465L should be listed as an XPORT-IAP type
device.
3. Double-click on the device in the right-hand section of the DeviceInstaller
window; a list of configuration parameters will be shown, including the IP
Address. If multiple devices are shown, the correct one can be determined by
matching the Hardware Address shown with the address printed on the label
of the Ethernet module in the 465L. Note that the instrument cover must be
removed to inspect this address in the instrument.

8.5.4. Manually Assigning a Static IP Address

For applications where the IP Address must remain constant, a static IP Address can
be manually assigned to the instrument and the DHCP function must be disabled.
1. Click Start->Programs->Lantronix DeviceInstaller->DeviceInstaller.
If your PC has more than one network adapter, a message displays. Select an
adapter and click OK.
Note: If the unit already has an IP address (e.g., DHCP has assigned
an IP address), click the Search icon and select the unit from the list of
Lantronix device servers on the local network.
2. Click the Assign IP icon.
3. If prompted, enter the hardware address (on the product label) and click Next.
4. Select Assign a specific IP address and click Next.
5. Enter the IP address. The Subnet mask displays automatically based on
the IP address; if desired, you may change it. On a local network, you can
leave the Default gateway blank (all zeros). Click Next.
6. Click the Assign button and wait several seconds until a confirmation
message displays. Click Finish.
7. Select the device from the main window list and select Ping from the Tools
menu. The Ping Device dialog box shows the IP address of the selected unit.
8. From the Tools menu, click the Ping button. The results display in the Status
window. Click the Clear Status button to clear the window so you can ping
the device again.
58 Teledyne API Model 465L O
3
Monitor Manual 05509G DCN6806