Editing Numeric Values - Teledyne 465L Operation Manual

Teledyne API Model 465L O 3 Monitor Operation Manual

7.2.2. Editing Numeric Values

At certain places in the menu structure the operator can edit numeric values. The
menu buttons behave somewhat differently when in this mode.
Press CFG to select a digit to edit. The selected digit will blink. Next press the
UP/DOWN arrows to increment/decrement the selected digit. Press CFG again to
select another digit. Pressing CFG at the last digit will wrap back to the first digit.
Once all the digits have been edited, press ENT to accept the new value.
To abort the editing process without changing the original value, press and hold the
CFG button until the display returns to the previous menu level.
Note that limit checking is enforced while editing values and changes that would
result in invalid values are ignored.
40 Teledyne API Model 465L O
3
Monitor Manual 05509G DCN6806