HP A8800 Configuration Manual page 296

[CEa2-ospf-1-area-0.0.0.0] network 10.11.0.0 0.0.255.255
[CEa2-ospf-1-area-0.0.0.0] quit
[CEa2-ospf-1] quit
8. Configure CE b2:
# Enable IP multicast routing.
<CEb2> system-view
[CEb2] multicast routing-enable
# Assign an IP address and enable IGMP and PIM-SM on GigabitEthernet 4/1/1.
[CEb2] interface GigabitEthernet 4/1/1
[CEb2-GigabitEthernet4/1/1] ip address 10.11.8.1 24
[CEb2-GigabitEthernet4/1/1] igmp enable
[CEb2-GigabitEthernet4/1/1] pim sm
[CEb2-GigabitEthernet4/1/1] quit
# Assign an IP address and enable PIM-SM on GigabitEthernet 4/1/2.
[CEb2] interface GigabitEthernet 4/1/2
[CEb2-GigabitEthernet4/1/2] ip address 10.11.4.2 24
[CEb2-GigabitEthernet4/1/2] pim sm
[CEb2-GigabitEthernet4/1/2] quit
# Assign an IP address to Loopback 1, and enable PIM-SM.
[CEb2] interface loopback 1
[CEb2-LoopBack1] ip address 3.3.3.3 32
[CEb2-LoopBack1] pim sm
[CEb2-LoopBack1] quit
# Configure Loopback 1 as a C-BSR and a C-RP for VPN b.
[CEb2] pim
[CEb2-pim] c-bsr loopback 1
[CEb2-pim] c-rp loopback 1
[CEb2-pim] quit
# Configure OSPF.
[CEb2] ospf 1
[CEb2-ospf-1] area 0.0.0.0
[CEb2-ospf-1-area-0.0.0.0] network 3.3.3.3 0.0.0.0
[CEb2-ospf-1-area-0.0.0.0] network 10.11.0.0 0.0.255.255
[CEb2-ospf-1-area-0.0.0.0] quit
[CEb2-ospf-1] quit
Verify the configuration
# Display the local share-group information of VPN instance a on PE 1.
<PE1> display multicast-domain vpn-instance a share-group local
MD local share-group information for VPN-Instance: a
Share-group: 239.1.1.1
MTunnel address: 1.1.1.1
# Display the local share-group information of VPN instance b on PE 1.
<PE1> display multicast-domain vpn-instance b share-group local
MD local share-group information for VPN-Instance: b
Share-group: 239.4.4.4
MTunnel address: 1.1.1.1
284