Multicast Vpn Configuration Example - HP A8800 Configuration Manual

Task
3. Display the switch-group
information sent by the
specified VPN instance in the
MD.
4. Display information about the
BGP MDT peer groups.
5. Display information about the
BGP MDT peers.
6. Display BGP MDT routing
information.
7. Reset the BGP MDT
connections.

Multicast VPN configuration example

Single-AS MD-VPN configuration
Network requirements
The network requirements for single-AS MD-VPN configuration are listed in the table below:
Item
Multicast sources and receivers
Command
display multicast-domain vpn-instance
vpn-instance-name switch-group send
[ group group-address | reuse interval |
vpn-source-address [ mask { mask-length |
mask } ] | vpn-group-address [ mask
{ mask-length | mask } ] ] * [ | { begin |
exclude | include } regular-expression ]
display bgp mdt group [ group-name ] [ |
{ begin | exclude | include }
regular-expression ]
display bgp mdt peer [ [ ip-address ]
verbose ] [ | { begin | exclude | include }
regular-expression ]
display bgp mdt { all | route-distinguisher
route-distinguisher } routing-table
[ ip-address [ mask | mask-length ] ] [ |
{ begin | exclude | include }
regular-expression ]
reset bgp mdt { as-number | ip-address | all
| external | group group-name | internal }
Network requirements
•
In VPN a, S 1 is the multicast source, and R 1, R 2 and R 3 are
receivers.
•
In VPN a, S 2 is the multicast source, and R 4 is a receiver.
•
Of VPN a, the share-group address is 239.1.1.1, and the address
range of its switch-group-pool is 225.2.2.0 to 225.2.2.15.
•
Of VPN b, the share-group address is 239.2.2.2, and the address
range of its switch-group-pool is 225.4.4.0 to 225.4.4.15.
259
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.