HP A8800 Configuration Manual page 443

[RouterB-pim6] c-rp 1002::2 scope 4
[RouterB-pim6] quit
# On Router D, configure the service scope of RP advertisements and configure Serial 4/1/9/1:0
as a C-BSR and C-RP of admin-scoped zone 2.
[RouterD] pim ipv6
[RouterD-pim6] c-bsr scope 4
[RouterD-pim6] c-bsr 3002::2
[RouterD-pim6] c-rp 3002::2 scope 4
[RouterD-pim6] quit
# On Router F, configure Serial 4/1/9/1:0 as a C-BSR and C-RP in the global-scoped zone.
<RouterF> system-view
[RouterF] pim ipv6
[RouterF-pim6] c-bsr scope global
[RouterF-pim6] c-bsr 8001::1
[RouterF-pim6] c-rp 8001::1
[RouterF-pim6] quit
Verify the configuration
# Display BSR information and the locally configured C-RP information on Router B.
[RouterB] display pim ipv6 bsr-info
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Accept Preferred
Scope: 14
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 1002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Uptime: 00:04:54
Next BSR message scheduled at: 00:00:06
Candidate BSR Address: 1002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Candidate RP: 1002::2(Serial4/1/9/1:0)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:15
# Display BSR information and the locally configured C-RP information on Router D.
[RouterD] display pim ipv6 bsr-info
Elected BSR Address: 8001::1
431