Resetting Ipv6 Mbgp Connections - HP A8800 Configuration Manual

Resetting IPv6 MBGP connections

When you change an IPv6 MBGP routing policy, you can make the new configuration effective by
resetting the IPv6 MBGP connections.
Task
Reset the specified IPv6 MBGP
connections.
Clearing IPv6 MBGP information
Task
Clear dampened IPv6 MBGP
routing information and release
suppressed routes.
Clear IPv6 MBGP route flap
statistics.
IPv6 MBGP configuration example
Network requirements
As shown in
in the two ASs, and IPv6 MBGP runs between the two ASs to exchange IPv6 multicast route information.
The multicast source belongs to IPv6 PIM-SM 1, and the receiver belongs to IPv6 PIM-SM 2. .
Enable the imbedded RP function for all routers in the IPv6 PIM domain.
Figure 120, IPv6 PIM-SM 1 is in AS 100 and IPv6 PIM-SM 2 is in AS 200. OSPFv3 is the IGP
Command
reset bgp ipv6 multicast
{ as-number | ipv6-address
[ flap-info ] | all | group
ipv6-group-name | external |
internal }
Command
reset bgp ipv6 multicast
dampening [ ipv6-address
prefix-length ]
reset bgp ipv6 multicast flap-info
[ ipv6-address/prefix-length |
regexp as-path-regexp |
as-path-acl as-path-acl-number ]
466
Remarks
Available in user view.
Remarks
Available in user view.
Available in user view.