Pim-Sm Admin-Scoped Zone Configuration Example - HP A8800 Configuration Manual

# Display the PIM routing table information on Router E.
[RouterE] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 0 (S, G) entry
(*, 225.1.1.0)
RP: 192.168.9.2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:13:16
Upstream interface: Register
Upstream neighbor: 192.168.4.2
RPF prime neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Pos5/1/3

PIM-SM admin-scoped zone configuration example

Network requirements
Receivers receive VOD information through multicast. The entire PIM-SM domain is divided into
admin-scoped zone 1, admin-scoped zone 2, and the global-scoped zone. Router B, Router C, and
Router D are ZBRs of the three domains respectively.
Source 1 and Source 2 send different multicast streams to multicast group 239.1.1.1. Host A receives the
multicast streams from Source 1 only, while Host B receives the multicast streams from Source 2 only.
Source 3 sends multicast streams to multicast group 224.1.1.1. Host C is a multicast receiver for this
multicast group.
Serial 4/1/9/1:0 of Router B acts as a C-BSR and C-RP of admin-scoped zone 1, which serve the
multicast group range 239.0.0.0/8. Serial 4/1/9/1:0 of Router D acts as a C-BSR and C-RP of
admin-scoped zone 2, which also serve the multicast group range 239.0.0.0/8. Serial 4/1/9/1:0 of
Router F acts as a C-BSR and a C-RP of the global-scoped zone, which serve all the multicast groups other
than those in the 239.0.0.0/8 range.
IGMPv2 runs between Router A, Router E, Router I, and their respective receivers.
Protocol: pim-sm, UpTime: 00:13:16, Expires: 00:03:22
169