Sony MVS-6520 User Manual page 37

Name Description
• Press the corresponding one of these
KEY1 ON to
KEY4 ON (DSK1
buttons to cut key 1 to key 4 in or out
ON to DSK4 ON
instantaneously.
for the PGM/PST
• The button lights red when the
bank)
corresponding key appears in the final
program output, and lights amber when
the key does not.
KEY1 TRANS to Press these buttons to carry out an auto
KEY4 TRANS
transition.
(DSK1 TRANS
to DSK4 TRANS
for PGM/PST
banks)
Key source This displays the source name selected
name display on the corresponding keyer.
Notes
For details about key 5 to 8 operations,
Operation" (p.
412).
i Key delegation buttons
Assign the desired keyer, by pressing [KEY1] to [KEY4]
([DSK1] to [DSK4]) and turning them on.
While these buttons are held down, you can select a key
source with the cross-point buttons for the key bus.
Pressing one of these buttons twice in rapid succession
changes its state so that you can make cross-point
selections on the corresponding key bus.
The key delegation buttons can also be used for copying
keys.
1 "Copy and Swap Operations" (p.
For details,
j Independent key transition type selection buttons
These select the independent key transition type.
1 "Basic Independent Key Transition
For details,
Operations" (p.
75).
k Key snapshot buttons
These correspond to registers 1 to 4 of the keyer selected
with the key delegation buttons, and pressing a button
saves or recalls a key snapshot.
l K-SS STORE (key snapshot store) button
Press the key snapshot button of the register you want to
save while holding this button to save the key snapshot.
m Independent key transition / key snapshot control
Selecting a function using the buttons on the right toggles
the function of the eight LCD buttons as follows.
Key source
name display
Name
KEY TRANS
(key transition)
1 "8-Keyer
KEY SS (key
snapshot)
Notes
For details about key 5 to 8 operations,
149). Operation" (p.
section
LCD buttons
Description
• The function of the LCD buttons
switches to independent key transition
type selection.
• Use the top row LCD buttons as key
delegation buttons for keys 1 to 4.
• Use the bottom row LCD buttons as
independent key transition type
selection buttons.
• The function of the LCD buttons
switches to key snapshot operation.
• Use the top row LCD buttons as key
delegation buttons for keys 1 to 4.
• Use the bottom row LCD buttons as
key snapshot buttons. You can save
key snapshots by pressing these
buttons while holding the [KEY SS]
button.
412).
Names and Functions of Parts of the Control Panel
KEY TRANS button
KEY SS button
1 "8-Keyer
37