Kaleidoscope Settings - Sony MVS-6520 User Manual

No. Parameter
1 H
2 V

Kaleidoscope Settings

You can set the number of blocks, the partition reference
point and angle, horizontal and vertical offsets, a reflection
position, and other parameters.
Applying the Kaleidoscope effect
In the Non Linear >Kaleidoscope menu (4141.15), set the
following parameters.
No. Parameter
1 Number
2 Phase
3 Offset H
4 Offset V
To reflect the kaleidoscope image as if in a mirror
1
To reflect in the horizontal direction, press [Mirror H],
turning it on.
2
To reflect in the vertical direction, press [Mirror V],
turning it on.
To set the reflection position
1
Press [Position], turning it on.
2
Set the following parameters.
No. Parameter
1 H
2 V
To cyclically repeat part of the original and its
reflection
Press [Cyclic], turning it on.
Lens Settings
You can set the shape and aspect ratio of the lens, the
angle, the magnification ratio, the curve ratio, the size, the
center position, and other parameters.
You can also choose to display only the portion of the
image that is seen through the lens.
198
Applying Special Effects (Nonlinear Effect Settings)
Adjustment
Horizontal original image center
position
Vertical original image center
position
Adjustment
Number of blocks
Angle of partition reference point
Amount of horizontal offset
Amount of vertical offset
Adjustment
Horizontal reflection position
Vertical reflection position
Applying the Lens effect
1
In the <Mode> group of the Non Linear >Lens menu
(4141.16), select the lens shape.
Circle
Rectangle
Star
Heart
Bar
Cross
2
Depending on the selected lens shape, set the
following parameters.
When Circle, Rectangle, Star, or Heart is selected
No. Parameter Adjustment
1 Magnify H Magnification ratio
2 Curve H Curve ratio
3 Size H Size
4 Angle Slant angle
5 Aspect Aspect ratio
When Bar is selected
No. Parameter Adjustment
1 Magnify H Magnification ratio
2 Curve H Curve ratio
3 Size H Size
4 Angle Slant angle
When Cross is selected
Parameter group [1/2]
No. Parameter Adjustment
1 Magnify H Horizontal magnification ratio
2 Curve H Horizontal curve ratio
3 Size H Horizontal size
Parameter group [2/2]
No. Parameter Adjustment
1 Magnify V Vertical magnification ratio
2 Curve V Vertical curve ratio
3 Size V Vertical size
To make only the lens part visible
Press [Lens Only], turning it on.
The parts of the image outside the lens are removed.
To set the lens center position
1
Press [Position], turning it on.