Sony MVS-6520 User Manual page 213

2
Press [Light 1], turning it on.
3
Set the following parameters.
No. Parameter Adjustment
1 Total Brightness of whole image
Ambient
2 Intensity
Intensity (brightness) of the light
source
3 Soft Softness of the lighted area
• Lowering the brightness of the image makes
Spotlighting more effective.
• The Total Ambient setting is shared with the
Lighting function.
4
In the <Spot Mode> group, select the type of light
source (1 p. 209).
Parallel: Parallel light source. The direction can be
set.
Point: Point light source. The position can be set.
Line: Line light source. The position and angle can be
set.
Whole: Non-directional light source which
illuminates the whole image (no settings).
5
According to the selected light source type, set the
following parameters.
When Parallel is selected
No. Parameter Adjustment
1 Longitude Longitude
2 Latitude Latitude
When Point is selected
No. Parameter Adjustment
1 X Movement in X-axis direction
2 Y Movement in Y-axis direction
3 Z Movement in Z-axis direction
When Line is selected
No. Parameter Adjustment
1 X Movement in X-axis direction
2 Y Movement in Y-axis direction
3 Z Movement in Z-axis direction
4 Longitude Longitude
6
In the <Axis Select> group, select the coordinate space
in which to place the light source.
Source: Place the light source in source coordinate
space. The spotlight moves when the image
moves.
Target: Place the light source in target coordinate
space. The spotlight does not move, even when the
image moves.
For details about the coordinate space in which to
1 "Linking and unlinking
place the light source,
image and spotlight" (p.
To set a test sphere
1
In the Light 1 menu (4156.3), press [Test Sphere],
turning it on.
A test sphere effect appears on the image surface.
2
Adjust the following parameter.
No. Parameter Adjustment
5 Amp Distance of light
a) Light appears from Z direction. At –100.00 the light goes deepest, at
+100.00 the whole image is lit like a flat effect.
To select the lighted area
In the <Area Select> group of the Light 1 menu (4156.3),
select one of the following.
FRGD: The light strikes the image foreground.
BKGD: The light strikes the image background.
Both: The light strikes both foreground and background.
1 "Selecting the lighted area" (p.
For details,
Notes
• If you selected [Multiply] in the <Fill Blending Mode>
group of the Light Color Adjust menu
light effect is not applied to the background, even if you
select [BKGD] or [Both].
• If the setting of Brilliancy in the <Fill Source> group of
the Light Color Adjust menu
light effect is not applied to the background, even if you
select [BKGD] or [Both].
• When the global effect Combiner is set to [Mix] or
[Depth], the light effect is not applied to the background,
even if you select [BKGD] or [Both].
To select Surface Flat
In the Light 1 menu (4156.3), press [Surface Flat], turning
it on.
If you have selected anything other than [Flat] in the
<Surface Select> group of the Spot Lighting menu, the
part corresponding only to the surface being struck by the
currently set light from the light source is shown in the
same way as if [Flat] had been selected.
To set the shape of the light
1
In the Light 1 menu (4156.3), press [Shape], turning it
on.
Applying Special Effects (Lighting and Recursive Effects)
210).
a)
210).
(1 p. 214), the
(1 p. 214) is 100.00, the
213