3Target FM selection buttons
Frame memory
selection area
6 File selection
area
a Auto store status display
Depending on the Setup menu settings, this appears when
the auto store function is enabled.
b Display of available image capacity
This shows the remaining number of frames. When no
more frames can be stored, "1" or "0" appears in red in pair
mode, and "0" appears in red in single mode.
128
Still Image Operations
1 Auto store status display
2 Display of available image capacity
4 Pair selection buttons
c Target FM selection buttons
Display of ancillary data
Still/duration display
Press one of these to select which of the selected outputs
(FM1 and FM2 in the example shown) the operation
applies to.
The following information appears on the button.
7 Frame memory
5 [Pair] button
9 [Find]
8 [Direct Recall]
Status display
Reposition/Lock status display
The border color shows the status as follows:
Blue: Selected as the reference channel
Orange: Selected, but not as the reference channel
Black: Not selected
folder selection
area
button
button