Sony MVS-6520 User Manual page 296

Menu Function
• Carry out menu
Menu Macro
Register
macro register
menu (menu
editing.
macro
• Recall a menu
register
macro register and
editing)
execute a menu
macro.
Menu Macro Edit events in a menu
Edit menu
macro register.
(editing of
menu macro
events)
Menu macro registers
The area of memory that holds a menu macro is termed a
"menu macro register." For each control panel there are 99
menu macro registers, numbered 1 to 99. You can edit
these in the Menu Macro Register menu.
Menu macro events
The events that can be recorded in a menu macro are
operations carried out in a menu.
For menu operations which are not recorded in menu
1 "Menu Operations Not Recorded in a Menu
macros,
Macro" (p.
430).
Recalling a Menu Macro Register
and Executing a Menu Macro
Menu macro operation is carried out by recalling a menu
macro register.
Notes
• Menu macros and macros recalled with a control panel
button operate independently. Therefore, to synchronize
these, adjustment of the execution timing is required.
• Events saved in a menu macro are executed according to
the settings in setup, and therefore if you change the
setup settings, it may not be possible to replay an event.
• When two menu macros are recalled successively, the
later coming macro is ignored as far as the first macro is
being executed.
Recalling a Menu Macro Register
1
Open the Macro >Menu Macro Register >Recall &
Run menu (5431).
296
Menu Macros
Operations
• Recalling a register
and executing a
menu macro
• Locking a register
• Copying a register
• Deleting a register
• Naming a register
• Inserting an event
• Deleting an event
• Modifying an event
2
3
Executing a menu macro
In the Macro >Menu Macro Register >Recall & Run menu
(5431), check that you are not in macro editing mode, then
use the following procedure.
1
2
To stop execution of a macro
Press [Stop].
To move to the start of a menu macro event
Press [Rewind].
Interval between events currently set
Selected event number / total number of events
Currently recalled register
Register number and name
L/E indication: "L" indicates "the register is
locked." "E" indicates an empty register.
Interval between events
Number of register selected on
the menu macro register list
Menu macro configuration list
Select a register.
Press [Recall & Run x] or [Recall x] ("x" is the number
of the register selected in the menu macro register list).
To execute the menu macro at the same time as
recalling the register, press [Recall & Run x].
To recall the register only, press [Recall x].
Select the opening event to execute.
Press [Run].