Modification - Sony MVS-6520 User Manual

This inserts the current image as the new keyframe.
Inserting a keyframe may change the total duration of
the effect.
1 "Time Settings" (p.
For details,

Modification

Modifying keyframes
1
Press the [EFF] button, then press the [EDIT ENBL]
button, turning it on.
2
Stop the effect at the desired edit point.
When the edit point is on a keyframe, this is what you
modify. If the edit point is between two keyframes, the
previous keyframe is what you modify.
Notes
In constant duration mode
only possible when the edit point is on a keyframe.
3
Using image transformations or adding special effects,
modify the keyframe.
4
Press the [MOD] button.
Modifying more than one keyframe
simultaneously
You can modify a number of keyframes simultaneously.
There are three different operating procedures.
• Modifying from the edit point to a particular keyframe
• Modifying all keyframes in the effect
• Modifying the keyframes in a specified range
The different procedures for these cases are now
described.
To modify from the edit point to a particular
keyframe
1
Press the [EFF] button, then press the [EDIT ENBL]
button, turning it on.
2
Stop the effect at the first keyframe of the range to be
modified.
3
Carry out the necessary modifications.
4
Press the [FROM TO] button.
This switches the memory recall section to numeric
keypad entry mode.
The alphanumeric display shows the current keyframe
number and the indication "TO."
252
Creating and Editing Keyframes
241).
(1 p. 241), modification is
5
Enter the number of the last keyframe to be modified
from the numeric keypad and press the [ENTR] button
to confirm.
The [FROM TO] button lights green.
6
Press the [MOD] button. Alternatively, hold down the
[SHFT] button and press the [MOD] button.
For the difference in the result,
changes when a number of keyframes are modified"
(p. 253).
To modify all keyframes in the effect
1
Press the [EFF] button, then press the [EDIT ENBL]
button, turning it on.
2
Carry out the necessary modifications on any
keyframe.
3
Press the [ALL] button, turning it on green.
4
Press the [MOD] button. Alternatively, hold down the
[SHFT] button and press the [MOD] button.
For the difference in the result,
changes when a number of keyframes are modified"
(p. 253).
To modify the keyframes in a specified range
1
Press the [EFF] button, then press the [EDIT ENBL]
button, turning it on.
2
Stop the effect at any keyframe within the range to be
modified.
3
Carry out the necessary modifications.
4
Press the [FROM TO] button.
This switches the memory recall section to numeric
keypad entry mode.
The alphanumeric display shows the current keyframe
number and the indication "TO."
5
Carry out the following operations.
• To set the first keyframe in the range to be modified,
press the [CLR] button, then enter the keyframe
number using the numeric keypad buttons, and press
the [ENTR] button to confirm.
• To set the last keyframe in the range to be modified,
enter the keyframe number using the numeric
keypad, and press the [ENTR] button to confirm.
The [FROM TO] button lights green.
1 "Differences in the
1 "Differences in the