About The Macro Attachment List Display - Sony MVS-6520 User Manual

Symbol Parameter name
FMLoop Device?
FMLoopMode?
MenuMacroRun Register?
KeyBusUtilityButton ME?
BANK?
KeyBusUtilityButton
?
UtilityStatus?
ClipRecall Device?
ClipType?
Clip?
DeviceRecord Device?
AuxMix AuxMixBus
AuxMixStatus
Example of File Contents
Line Content
1 PNL 0001PNL_0000.PMRMACROREG
2 #,Sample,
3 Event?,Snapshot,Region?,ME1,Register?,1,Attribute?,Off,Time?,
Current
4 Continue?,Snapshot,Region?,PP,Register?,1,Attribute?,Off,Time?,
Current
5 Event?,MEXpt,ME?,ME1,MEBus?,A,Xpt?,1,VideoKey?,Video
About the Macro
Attachment List Display
The Button column in the macro attachment list displayed
in the status area of the Macro >Attachment menu (5421)
screen shows character strings which identify macro
attachment assigned buttons.
Each of these character strings is in fact a combination of
characters shown in the Button(1), Button(2), and
Button(3) columns in the following tables.
For example, if Block and Button(1) to Button(3) are:
Block: P/P XPT
Button(1): UTIL1 Bus
Button(2): V
Button(3): XPT2
Arguments
FrameMemory1Clip to
FrameMemory8Clip
On (a),
Off (b)
1 to 99
ME1, PP
Bank1 to Bank5
1 to 32
On,
Off,
Current (a)
FrameMemory1Clip to
FrameMemory8Clip
Pair, Single
Clip Name
1 to 12
Aux1, Aux3, Aux5, ... Aux23
On, Off
Then, the display in the Button column is:
UTIL1 Bus V XPT2
which indicates "P/P row utility1 bus video signal, cross-
point button 2."
M/E and PGM/PST Banks
The following table shows only the macro attachment
assignable buttons in the PGM/PST bank.
For the M/E1 bank, "P/P" changes to "M/E1" in the Block
Select and Block columns. In addition, "DSK" changes to
"KEY" in the Button(1) and Button(2) columns. The
contents of the Button(3) column do not change.
Description
Applicable clip
Frame memory clip loop on/off
(a): Loop is enabled
(b): Loop is disabled
Applicable register number
Control blocks on the applicable bank
Applicable bank
Applicable button
Status of function assigned to button
(a): Operates according to currently assigned
function
Applicable clip
File type of clip (pair/single)
Name of clip (up to four characters)
Applicable device
Target AUX bus (odd-numbered bus)
AUX mix transition On/Off
Description
File header
Comment
Simultaneously recall snapshots from register
number 1 in the M/E-1 and PGM/PST regions.
Select button number 1 on the M/E-1 A bus.

About the Macro Attachment List Display

429