Table of Contents
Advertisement
HTML Operation, cont'd
Date/Time Settings fields
The Date/Time Settings fields (figure 7-4) provide a location for viewing and
setting the time functions.
Figure 7–4 — Date/Time Settings fields
Change the date and time settings as follows:
1.
2.
3.
N If setting the time, set the local time. The Zone variable allows you to then enter
N The Zone field identifies the standard time zone that has been selected and
4.
5.
N When daylight saving time is enabled, the unit updates its internal clock
6.
7-6
Annotator • HTML Operation
Click the desired variable's drop box. The adjustable variables are month,
day, year, hours, minutes, AM/PM, and (time) zone. A drop-down scroll box
appears.
Click and drag the slider or click the scroll up
desired variable is visible.
Click on the desired variable.
the offset from Greenwich Mean Time (GMT).
displays the amount of time, in hours and minutes, that the local time varies
from the GMT international time reference.
Repeat steps 1 through 3 for other variables that need to be changed.
Select the appropriate Daylight Saving radio button. To turn off daylight
savings time, select Off.
between Standard Time and Daylight Saving Time in the spring and fall on the
date that the time change occurs in the United States of America and parts of
Europe and Brazil. When daylight saving time is turned off, the unit does not
adjust its time reference.
Click the Submit at the bottom of the Date/Time Settings section to implement
your selections.
or down
buttons until the
Advertisement
Table of Contents
