Table of Contents
Advertisement
e
LCD display — This LCD screen displays two rows of menu, control response,
and configuration text.
f
Menu navigation buttons — These two buttons give access to menu
commands.
Menu button — This button, always lit amber, gives direct access to a series
Next button — This button, always lit amber, allows page changes within
g
Adjust knobs — These two knobs are used with the picture control buttons and
the menu navigation buttons to adjust settings.
Switching Inputs
To switch inputs, simply press the desired input button. The button lights amber
with an active video signal. If the output is configured correctly for the display
device, the image changes to the new input. An inactive signal gives no image.
Button Backlighting
The buttons can be backlit a dimmed amber.
To turn the backlighting on or off, press and hold the Bright/Cont and Color/Tint
buttons simultaneously until the buttons become lit or unlit.
See "The Annotator Menu System" section
of five menus.
each one of the menus, and to exit the menu cycle.
Annotator • Front Panel Operation
in this chapter.
3-3
Advertisement
Table of Contents
