Table of Contents
Advertisement
Front Panel Operation, cont'd
3.
4.
N
Capture/Recall settings (front panel activated)
A snapshot of the currently displayed image (including annotations) can be
captured and saved to the Annotator memory using the front panel Capture/Recall
button, the Next button, and the two Adjust knobs. This image or any other saved
image can then be recalled and output to the active display at a later time.
To capture an image:
1.
2.
N
3.
N
3-10
Annotator • Front Panel Operation
After tapping the fourth cross, the unit saves the calibration data and restarts
the sequence. Repeat the process for each connected touch screen.
Press any front panel button to exit the sequence and save the data.
See page 4-2
for detailed touchscreen setup instructions.
Press and hold the Capture/Recall button for 3 seconds. The LCD displays
"IMAGE CAPTURE".
Press Next to enter the save menu, the LCD displays "Save As: <N/A>".
Use either Adjust knob to scroll through 16 image names, (IMG01.bmp
through IMG16.bmp) to select a suitable name.
When saving an image to a selected name, any image previously saved with that
selected name is overwritten in favor of the newly saved image.
When the desired image name is reached, press Next. The LCD displays
"Saving image Please wait". The display then changes to "Saving image"
and a progress bar begins showing the progress of the image capture process.
When the image is saved the LCD reverts to the default menu cycle.
Custom image names can be used when image captures are initiated using the
appropriate SIS commands.
Step 1
UNDO/
CLEAR
Press and hold
CAPTURE/
for 3 seconds.
RECALL
Step 2
MENU
Press
NEXT
ADJUST
Rotate either
adjust knob.
Step 3
MENU
Press
NEXT
LCD screen displays
IMAGE
CAPTURE
LCD screen displays
Save As:
<N/A>
LCD screen displays
Save As:
IMG05.BMP
LCD screen displays
Saving Image
Please wait
then
Saving image:
Advertisement
Table of Contents
