Modifying Network Settings From The Control Panel - Extron electronics Quantum Ultra Series User Manual

Modifying Network Settings from the Control Panel

To change the IP addresses of the LAN A and LAN B ports:
1.
2.
3.
4.
5.
On the Control Panel window, click the Network Settings button (see figure 41,
, on page 42. The Network Settings window opens.
4
Figure 54. Network Settings for LAN A Port
If desired, enter a name of 1 to 15 characters for your Quantum Ultra in the Device
Name field (see figure 54,
1
in this name.
NOTES:
• The device name must start with a letter.
• All letters in the Device Name field are displayed in uppercase. By default the
device name is QU610- followed by the last three hex pairs of MAC address.
Select the tab for the LAN port to configure (LAN A or LAN B) (
Either:
Select the Use DHCP checkbox (
•
• Enter the addresses in the IP Address, Subnet Mask, Default Gateway, and
DNS Server fields ( ).
4
NOTE: The Media Access Code (MAC) address cannot be changed.
If desired, select the tab for the other LAN port and repeat step 4.
Quantum Ultra Videowall Processing System • Operation
). Only letters, numbers, and the hyphen (-) can be used
) to automatically assign all IP addresses, or
3
).
2
50