Table of Contents
Advertisement
Front Panel Operation, cont'd
User presets
Within this menu up to 16 presets can be saved or recalled.
Save a user preset
1.
2.
3.
4.
N If an existing Preset is chosen to save to, the previous settings are overwritten in
Recall a user preset
1.
2.
3.
4.
Input configuration
Within this menu any of the seven inputs can be configured. Each input has
different settings depending on the signal format. Consult the tables below for
signal formats per input and possible adjustments per signal format.
To configure inputs:
1.
N If the input showing is not the one to be adjusted, press the
2.
Input #1
*RGB
YUVp/HDTV
Auto Detect
Figure 3-3 — Signal formats per input (*= default value)
3-6
Annotator • Front Panel Operation
From the default display cycle press Menu to enter the User Presets submenu.
Press Next twice to go to the Save Preset menu.
Rotate either front panel encoder to select a preset (1 to 16)
to save the current settings to . Default setting is <N/A>.
Select <N/A> and press Next to move to the next submenu without saving.
Press Next to save the current image settings to the selected Preset number.
The Preset is saved and the LCD goes back to the top level User Preset menu.
favor of the new (current) settings.
From the default display cycle press Menu to enter the User Presets submenu.
Press Next to go to the Recall Preset menu.
Rotate either front panel adjust knobs ([{) to select a preset
(1 to 16) to recall as the current settings . Default setting is N/A.
Select <N/A> and press Next to move to the next submenu without recalling.
Press the Next button. The Preset is recalled, the image changes to the
recalled settings and the LCD goes back to the top level User Preset menu.
From the top level Input Configuration menu press the Next button to bring
up the input selection screen. The active input is displayed on the LCD with
current signal format.
desired input button.
With the correct input displayed, rotate the right adjust knob ({) to change the
signal format (refer to table below for signal type per input).
Input #2
Input #3
*RGB
*RGB
YUVp/HDTV
YUVp/HDTV
Auto Detect
RGBcvS
YUVi
S-Video
Composite
Auto Detect
Input #4
Input #5
Input #6 Input #7
*YUVi
*S-Video
*DVI
S-Video
Composite
Composite
Auto Detect
Auto Detect
Save Preset
<N/A>
Recall Preset
<02>
Input #2
YUVp/HDTV
*SDI
HD-SDI
Auto Detect
Advertisement
Table of Contents
