Config Filter Dhcp_Server - D-Link DES-1210-52/ME Cli Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To add an entry from the DHCP server/client filter list in the Switch's database:
DES-1210-52/ME:5# config filter dhcp_server add permit server_ip
10.1.1.1 client_mac 00-00-00-00-00-01 ports 6-8
Command: config filter dhcp_server add permit server_ip 10.1.1.1
client_mac 00-00-00-00-00-01 ports 6-8
Success.
DES-1210-52/ME:5#

config filter dhcp_server

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the illegal server log suppress duration time to 5 minutes:
DES-1210-52/ME:5# config filter dhcp_server illegal_server_log_suppress_duration
5min
Command: config filter dhcp_server illegal_server_log_suppress_duration 5min
Success.
DES-1210-52/ME:5#
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
DHCP server/client binding entry.
config filter dhcp_server [add permit server_ip <ipaddr>
{ client_mac <macaddr>} ports [ <portlist> | all ] | delete permit
server_ip <ipaddr> { client_mac <macaddr> } {ports <portlist>
state [ enable | disable]}
The config filter dhcp_server command has two purposes: To filter
all DHCP server packets on the specified port(s) and to allow some
DHCP server packets to forwarded if they are on the pre-defined
server IP address/MAC address binding list. Thus the DHCP server
can be restricted to service a specified DHCP client. This is useful
when there are two or more DHCP servers present on f network.
<ipaddr> – The IP address of the DHCP server to be filtered
client_mac <macaddr> – The MAC address of the DHCP client.
ports <portlist> – The port number to which the DHCP filter will be
applied.
state – Enable/Disable the DHCP filter state.
Only administrator or operate-level users can issue this command.
DHCP.
config filter dhcp_server illegal_server_log_suppress_duration
[<1min | 5min | 30min>]
The config filter dhcp_server command.
<1min | 5min | 30min> – Specify the duration time.
Only administrator or operate-level users can issue this command.
58