Show Stp Ports; Show Stp Instance - D-Link DES-1210-52/ME Cli Reference Manual

show stp ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show stp port 1 on switch one:
DES-1210-52/ME:5# show stp ports 1
Command: show stp ports 1
MSTP Port Information
------------------------------
Port Index:1 , Port STP:Enabled ,
External PathCost : AUTO/200000 ,
Port RestrictedRole:False ,
Port Priority:128 ,
MSTI Designated Bridge
------ ----------------------------
0
DES-1210-52/ME:5#

show stp instance

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DES-1210-52/ME:5# show stp instance 0
Command: show stp instance 0
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To display the Switch's current instance_id configuration.
show stp ports {<portlist>}
The show stp ports command displays the STP Instance Settings
and STP Instance Operational Status currently implemented on the
Switch.
<portlist> – A port or range of ports to be configured. The port list is
specified by listing switch number and the beginning port number on
that switch, separated by a colon. Then the highest port number of
the range is specified. The beginning and end of the port list range
are separated by a dash.
None.
Port Forward BPDU:Enabled ,
80:00:00:01:02:03:04:05 200000
To display the Switch's STP instance configuration
show stp instance {<value 0-63>}
The show stp instance command displays the Switch's current
STP Instance Settings and the STP Instance Operational Status.
<value 0-63> - The value of the previously configured instance_id on
the Switch. The value may be between 0 and 63. An entry of 0
displays the STP configuration for the CIST internally set on the
Switch.
None.
P2P:Auto ,
Edge Port:Auto ,
Port RestrictedTCN:False
Internal PathCost Prio Status
------------------------- ------ ----------
128
159
Role
----------
Disabled Disabled