Config Dhcp_Relay Delete Ipif System; Config Dhcp_Relay Hops; Config Dhcp_Relay Vlan - D-Link DES-1210-52/ME Cli Reference Manual

config dhcp_relay delete ipif System

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove a DHCP server from the DHCP Relay server list:
DES-1210-52/ME:5# config dhcp_relay delete ipif System 10.6.150.49
Command: config dhcp_relay delete ipif System 10.6.150.49
Success.
DES-1210-52/ME:5#

config dhcp_relay hops

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the DHCP relay hops on the Switch:
DES-1210-52/ME:5# config dhcp_relay hops 12
Command: config dhcp_relay hops 12
Success.
DES-1210-52/ME:5#

config dhcp_relay vlan

Purpose
Syntax
Description
Parameters
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To delete a DHCP server from the DHCP Relay server list.
config dhcp_relay delete ipif System <ipaddr>
The config dhcp_relay delete ipif System command deletes a
DHCP servers defined as a DHCP Relay server.
<ipaddr> − The IP address of the DHCP server.
Only Administrator, operator or power user-level users can issue this
command.
To delete a DHCP server from the DHCP Relay server list.
config dhcp_relay hops <value 1-16>
The config dhcp_relay hops command configures the
DHCP/BOOTP relay feature.
hops <value 1-16> − Specifies the maximum number of relay agent
hops that the DHCP packets can cross.
Only Administrator, operator or power user-level users can issue this
command.
To configure a VLAN of DHCP Relay to be enabled or disabled of
the Switch.
config dhcp_relay vlan [<vlan_name 32> | vlanid <vidlist>] state
[enable | disable]
The config dhcp_relay vlan command configures a VLAN of DHCP
Relay to be enabled or disable of the Switch.
<vlan_name 32> − Specifies the VLAN name to be configured.
117