Delete Cos Protocol_Mapping; Config Cos Vlanid_Mapping - D-Link DES-1210-52/ME Cli Reference Manual

delete cos protocol_mapping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CoS protocol mapping on the Switch:

config cos vlanid_mapping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a CoS VLAN id mapping on the Switch:
DES-1210-52/ME:5# config cos vlanid_mapping vid 100 class 2
Command: config cos vlanid_mapping vid 100 class 2
Success.
DES-1210-52/ME:5#
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
DES-1210-52/ME:5#
To delete the CoS protocol mapping between an incoming packet's
802.1p priority value.
delete cos protocol_mapping protocol <ip_protocol 1-255>
The delete cos protocol_mapping command is used to delete the
CoS protocol mapping between an incoming packet's 802.1p priority
value.
<ip_protocol 1-255> - Specifies the mapped protocol IP to be
deleted.
Only administrator or operator-level users can issue this command.
DES-1210-52/ME:5# delete cos protocol_mapping protocol 10
Command: delete cos protocol_mapping protocol 10
Success.
DES-1210-52/ME:5#
To configure the CoS VLAN id mapping method on the Switch.
config cos vlanid_mapping vid <vlanid 1-4094> class <class_id
0-3>
The config cos vlanid_mapping command is used to configure the
CoS VLAN id mapping method on the Switch.
<vlanid 1-4094> - Specifies the vlan id to be mapped.
<class_id 0-3> - Specifies the number of the Switch's hardware
priority queue.
Only administrator or operator-level users can issue this command.
192