Show Dot1V_Protocol_Group; Config Port Dot1V Ports All - D-Link DES-1210-52/ME Cli Reference Manual

DES-1210-52/ME:5# delete dot1v_protocol_group all
Command: delete dot1v_protocol_group all
Success.
DES-1210-52/ME:5#

show dot1v_protocol_group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the protocol group ID 2:
DES-1210-52/ME:5# show dot1v_protocol_group group_id 2
Command: show dot1v_protocol_group group_id 2
Group ID
-------------- ----------------------------------- ----------------
2
2
Total Entries: 1
DES-1210-52/ME:5#

config port dot1v ports all

Purpose
Syntax
Description
Parameters
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To display the protocols defined in a protocol group.
show dot1v_protocol_group {group_id <id 1-16> | group_name
<name 32>}
The show dot1v_protocol_group command displays the protocols
defined in protocol groups.
group_id <id 1-16> − Specifies the group ID to be displayed.
group_name <name 32> − The name of the protocol group. The
maximum length is 32 characters.
None.
Protocol Group Name
group1
group1
To assign the VLAN for untagged packets ingress from the portlist
based on the protocol group configured.
config port dot1v ports all [add | delete] protocol_group
[group_name <name 32> | group_id <id 1-16>] [vlan
<vlan_name 32> | vlanid <id 1-4094>]
The config port dot1v ports all command assign the VLAN for
untagged packets ingress from the portlist based on the protocol
group configured.
[add | delete] −
group_name <name 32> − The name of the protocol group. The
maximum length is 32 chars.
Frame Type
EthernetII
IEEE802.3 SNAP 86dd
220
Protocol Value
------------------
86dd