Create Authen_Login Method_List_Name; Config Authen_Login - D-Link DES-1210-52/ME Cli Reference Manual

Command
config authen
server_group
delete authen
server_group
show authen
server_group
enable admin
config admin
local_enable
Each command is listed in detail, as follows:

create authen_login method_list_name

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the method list 'Trinity':
DES-1210-52/ME:5# create authen_login method_list_name Trinity
Command: create authen_login method_list_name Trinity
Success.
DES-1210-52/ME:5#

config authen_login

Purpose
Syntax
Description
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
Parameter
[<string 15> | radius | tacacs+] [add | delete] server_host [<ipaddr> | ipv6address
<ipv6addr>] protocol [radius | tacacs+]
<string 15>
{<string 15>}
To create a user-defined list of authentication methods for users
logging on to the Switch.
create authen_login method_list_name <string 15>
The create authen_login method_list_name command creates a
list of authentication techniques for user login. The Switch can
support up to eight method lists, but one is reserved as a default and
cannot be deleted. Multiple method lists must be created and
configured separately.
<string 15> - Defines the method_list_name to be created as a string
of up to 15 alphanumeric characters.
Only Administrator-level users can issue this command.
To configure a user-defined or default method list of authentication
methods for user login.
config authen_login [default | method_list_name <string 15>]
method [tacacs+ | radius | local | server_group <string 15> |
none]
The config authen_login command configures a user-defined or
default method list of authentication methods for users logging on to
the Switch. The sequence of methods implemented in this command
360