Show Dhcpv6_Relay Option_38 - D-Link DES-1210-52/ME Cli Reference Manual

Restrictions
Example usage:
To configure the DHCPv6 relay option_38 of ports 6~9 to be enabled on the Switch:
DES-1210-52/ME:5# config dhcpv6_relay option_38 ports 6-9 state enable
Command: config dhcpv6_relay option_38 ports 6-9 state enable
Success.
DES-1210-52/ME:5#

show dhcpv6_relay option_38

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the DHCPv6 relay option 38 of ports 5-8 on the Switch:
DES-1210-52/ME:5# show dhcpv6_relay option_38 ports 5-8
Command: show dhcpv6_relay option_38 ports 5-8
DHCPv6 Relay Option38 Information
Port State
----- --------- -------------- ----------------------
5 Disabled Default
6 Disabled Default
7 Disabled Default
8 Disabled Default
DES-1210-52/ME:5#
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
option 38 field before being relayed to the server. When the state is
disabled, the DHCP packet is relayed directly to the server.
subscriber_id [defult | user_define] - Use the user-defined string as
the subscriber ID.
Only Administrator or operate-level users can issue this command.
Used to display the DHCPv6 relay option 38 of the switch.
show dhcpv6_relay option_38 {ports <portlist>}
The show dhcpv6_relay option_38 command is used to display
the DHCPv6 relay option 38 of the switch.
ports <portlist> - Specifies the ports to be displayed.
None.
Type Subscriber ID
128