Show Gvrp; Show Gvrp Timer - D-Link DES-1210-52/ME Cli Reference Manual

show gvrp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP port 5~8 status:
DES-1210-52/ME:5# show gvrp 5-8
Command: show gvrp 5-8
Global GVRP : Enable
Port
----
5
6
7
8
Total Entries : 4
DES-1210-52/ME:5#

show gvrp timer

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP timer information:
DES-1210-52/ME:5# show gvrp timer
Command: show gvrp timer
Garp Timer Info (in milli seconds)
---------------------------------------
Join-time
-----------
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To display the GVRP status for a port list or port channel on the
Switch.
show gvrp {<portlist>}
The show gvrp command displays the GVRP status for a port list or
a port channel on the Switch.
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
None.
PVID GVRP State
---- ----------
1 Enable
1 Enable
1 Enable
1 Enable
To display the GVRP timer information on the Switch.
show gvrp timer
The show gvrp command displays the GVRP timer on the Switch.
None.
None.
Leave-time
----------
Ingress Checking
-----------------------
Enable
Enable
Enable
Enable
Leave-all-time
--------------
222
Acceptable Frame Type
---------------------------------
All Frames
All Frames
All Frames
All Frames