Alcatel-Lucent 7710 SR OS Configuration Manual page 461

Filter Associations — The associations for a filter ID will be displayed if the associations
keyword is specified. The assocation information is appended to the filter information. The following
table describes the fields in the appended associations output.
Sample Output
# show li filter li-mac "testLiMacFilter" association
===============================================================================
LI Mac Filter
===============================================================================
Filter Id
Entries
Description : test LI Mac filter setup
-------------------------------------------------------------------------------
Filter Association : Mac
-------------------------------------------------------------------------------
mac filter 1
Filter Entry Counters Output — When the counters keyword is specified, the filter entry output
displays the filter matches/hit information. The following table describes the command output for the
command.
7710 SR OS Router Configuration Guide
Label
Filter Associa-
tion
Service Id
SAP
Type
(Ingress)
(Egress)
: testLiMacFilter
: 4
Service Id : 60
- SAP 1/1/6:7 (Ingress)
- SAP 1/1/6:9 (Egress)
The filter associations displayed are for a MAC filter policy
Mac —
ID.
The service ID on which the filter policy ID is applied.
The Service Access Point on which the filter policy ID is applied.
The type of service of the Service ID.
The filter policy ID is applied as an ingress filter policy on the inter-
face.
The filter policy ID is applied as an egress filter policy on the interface.
Filter Policies
Description
Associated : Yes
Type : VPLS
Page 461