Alcatel-Lucent 7710 SR OS Configuration Manual page 160

Parameters
ip-address — Only displays the interface information associated with the specified IP address.
type — Specifies the session type.
Output BFD Session Output — The following table describes the show BFD session output fields:
State
Protocol
Tx Intvl
Tx Pkts
Rx Intvl
Rx Pkts
Mult
Sample Output
A:Dut-B# show router bfd session
===============================================================================
BFD Session
===============================================================================
Interface
-------------------------------------------------------------------------------
port-1-1
port-1-1
port-1-1
port-1-2
port-1-2
port-1-2
...
===============================================================================
*A:Dut-B#
A:Dut-B# show router bfd session src
===============================================================================
BFD Session
Page 160
Values
ipv4-address
Values iom | central | cpm-np
Label
Displays the administrative state for this BFD session.
Displays the active protocol.
Displays the interval, in milliseconds, between the transmitted BFD mes-
sages to maintain the session
Displays the number of transmitted BFD packets.
Displays the expected interval, in milliseconds, between the received BFD
messages to maintain the session
Displays the number of received packets.
Displays the integer used by BFD to declare when the neighbor is down.
Remote Address
10.1.1.3
3FFE::A01:103
FE80::A0A:A03
10.2.1.3
3FFE::A02:103
a.b.c.d (host bits must be 0)
Description
State
Protocols
Up (3)
pim isis
Up (3)
static bgp
Up (3)
pim isis ospf3
Up (3)
pim isis
Up (3)
static bgp
Up (3)
3FFE::A01:102 dest
7710 SR OS Router Configuration Guide
Tx Intvl Rx Intvl Multipl
Tx Pkts Rx Pkts Type
500 500 3
50971 50718 iom
10 10 3
N/A N/A cpm-np
10 10 3
N/A N/A cpm-np
500 500 3
50968 50718 iom
10 10 3
N/A N/A cpm-np
10 10 3
3FFE::A01:103