Alcatel-Lucent 7710 SR OS Configuration Manual page 422

Default
Parameters
src-mac
Syntax
Context
Description
Default
Parameters
Page 422
This is a two-byte protocol id that is part of the IEEE 802.3 LLC SNAP Ethernet Frame that follows
the three-byte OUI field.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and may not be part of the
same match criteria. MAC Match Criteria Exclusivity Rules on page 347
exclusive based on the frame format.
Note: The snap-pid match criterion is independent of the OUI field within the SNAP header. Two
packets with different three-byte OUI fields but the same PID field will both match the same filter
entry based on a snap-pid match criteria.
The no form of the command removes the snap-pid value as the match criteria.
no snap-pid
pid-value — The two-byte snap-pid value to be used as a match criterion in hexadecimal.
Values
0x0000 — 0xFFFF
src-mac ieee-address [ieee-address-mask]
no src-mac
config>filter>mac-filter>entry
Configures a source MAC address or range to be used as a MAC filter match criterion.
The no form of the command removes the source mac as the match criteria.
no src-mac
ieee-address — Enter the 48-bit IEEE mac address to be used as a match criterion.
Values HH:HH:HH:HH:HH:HH or HH-HH-HH-HH-HH-HH where H is a hexadecimal
digit
ieee-address-mask — This 48-bit mask can be configured using:
Format Style
Decimal
Hexadecimal
Binary
To configure so that all packets with a source MAC OUI value of 00-03-FA are subject to a
match condition then the entry should be specified as: 003FA000000 0xFFFFFF000000
Default
0xFFFFFFFFFFFF (exact match)
Values
0x00000000000000 — 0xFFFFFFFFFFFF
Format Syntax
DDDDDDDDDDDDDD
0xHHHHHHHHHHHH
0bBBBBBBB...B
7710 SR OS Router Configuration Guide
describes fields that are
Example
281474959933440
0x0FFFFF000000
0b11110000...B