Alcatel-Lucent 7710 SR OS Configuration Manual page 443

Sample Output
A:ALA-48# show filter ipv6
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope
-------------------------------------------------------------------------------
100
200
-------------------------------------------------------------------------------
Num IPv6 filters: 2
===============================================================================
A:ALA-48#
Output Show Filter (with filter-id specified) — The following table describes the command output for
the command when a filter ID is specified.
7710 SR OS Router Configuration Guide
Applied Description
Template Yes
Exclusive Yes
Label
Filter Id
Scope
Entries
Description
Applied
Def. Action
Filter Match
Criteria
Entry
Log Id
Src. IP
Dest. IP
test
The IP filter policy ID.
The filter policy is of type template.
Template —
The filter policy is of type exclusive.
Exclusive —
The number of entries configured in this filter ID.
The IP filter policy description.
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The default action for the filter ID for packets that do not
Forward —
match the filter entries is to forward.
The default action for the filter ID for packets that do not
Drop —
match the filter entries is to drop.
Indicates the filter is an IP filter policy.
IP —
The filter ID filter entry ID. If the filter entry ID indicates the entry is
, then the filter entry is incomplete as no action has been
(Inactive)
specified.
The filter log ID.
The source IP address and mask match criterion.
no criterion specified for the filter entry.
The destination IP address and mask match criterion.
cates no criterion specified for the filter entry.
Filter Policies
Description
0.0.0.0/0
indicates
indi-
0.0.0.0/0
Page 443