Alcatel-Lucent 7710 SR OS Configuration Manual page 152

reachable-time
Syntax
Context
Description
Default
Parameters
retransmit-time
Syntax
Context
Description
Default
Parameters
router-lifetime
Syntax
Context
Description
Default
Parameters
Page 152
reachable-time milli-seconds
no reachable-time
config>router>router-advert>if
This command configures how long this router should be considered reachable by other nodes on the
link after receiving a reachability confirmation.
no reachable-time
milli-seconds — Specifies the length of time the router should be considered reachable.
Values
0 — 3600000
retransmit-timer milli-seconds
no retransmit-timer
config>router>router-advert>if
This command configures the retransmission frequency of neighbor solicitation messages.
no retransmit-time
milli-seconds — Specifies how often the retransmission should occur.
Values
0 — 1800000
router-lifetime seconds
no router-lifetime
config>router>router-advert>if
This command sets the router lifetime.
1800
seconds — The length of time, in seconds, (relative to the time the packet is sent) that the prefix is
valid for route determination.
Values
0, 4 — 9000 seconds. 0 means that the router is not a default router on this link.
7710 SR OS Router Configuration Guide