Alcatel-Lucent 7710 SR OS Configuration Manual page 144

packet-too-big
Syntax
Context
Description
Parameters
param-problem
Syntax
Context
Description
Parameters
redirects
Syntax
Context
Description
Default
Page 144
packet-too-big [number seconds]
no packet-too-big
config>router>if>ipv6>icmp6
This command configures the rate for ICMPv6 packet-too-big messages.
number — Limits the number of packet-too-big messages issued per the time frame specifed in the
seconds parameter.
Values
10 — 1000
seconds — Determines the time frame, in seconds, that is used to limit the number of packet-too-big
messages issued per time frame.
Values
1 — 60
param-problem [number seconds]
no param-problem
config>router>if>ipv6>icmp6
This command configures the rate for ICMPv6 param-problem messages.
number — Limits the number of param-problem messages issued per the time frame specifed in the
seconds parameter.
Values
10 — 1000
seconds — Determines the time frame, in seconds, that is used to limit the number of param-problem
messages issued per time frame.
Values
1 — 60
redirects [number seconds]
no redirects
config>router>if>ipv6>icmp6
This command configures the rate for ICMPv6 redirect messages. When configured, ICMPv6
redirects are generated when routes are not optimal on the router and another router on the same
subnetwork has a better route to alert that node that a better route is available.
The no form of the command disables ICMPv6 redirects.
100 10 (when IPv6 is enabled on the interface)
7710 SR OS Router Configuration Guide