Alcatel-Lucent 7710 SR OS Configuration Manual page 421

isid
Syntax isid value [to higher-value]
no isid
Context config>filter>mac-filter>entry>match
Description
This command configures an ISID value or a range of ISID values to be matched by the mac-filter
parent. The pbb-etype value for the related SAP (inherited from the ethernet port configuration) or for
the related SDP binding (inherited from SDP configuration) will be used to identify the ISID tag.
When an isid statement is used in a match criteria the corresponding mac-filter can be applied only on
the egress side of a SAP/SDP binding. In order to be able to use an isid match criteria one needs to set
the mac-filter type attribute to isid. Once this configuration is performed only ISID match criteria are
allowed in the mac-filter.
The no form of this command removes the ISID match criterion.
Default no isid
value — Specifies the ISID value, 24 bits. When just one present identifies a particular ISID to be
to higher-value — Identifies a range of ISIDs to be used as matching criteria.
snap-oui
Syntax snap-oui [zero | non-zero]
no snap-oui
Context config>filter>mac-filter>entry
Description
This command configures an IEEE 802.3 LLC SNAP Ethernet Frame OUI zero or non-zero value to
be used as a MAC filter match criterion.
The no form of the command removes the criterion from the match criteria.
Default no snap-oui
Parameters zero — Specifies to match packets with the three-byte OUI field in the SNAP-ID set to zero.
non-zero — Specifies to match packets with the three-byte OUI field in the SNAP-ID not set to zero.
snap-pid
Syntax snap-pid pid-value
no snap-pid
Context config>filter>mac-filter>entry
Description
Configures an IEEE 802.3 LLC SNAP Ethernet Frame PID value to be used as a MAC filter match
criterion.
7710 SR OS Router Configuration Guide
used for matching.
Filter Policies
Page 421