Alcatel-Lucent 7710 SR OS Configuration Manual page 401

nat — specifyies that matching traffic is to be redirected for NAT performed by Integrated Service
redirect policy-name — Specifies the redirect policy configured in the config>filter>redirect-policy
context.
sap sap-id — Specifies the physical port identifier portion of the SAP definition. Only Ethernet SAPs
http-redirect url — Specifies the HTTP web address that will be sent to the user's browser.
following displays information that can optionally be added as variables in the portal URL
(http-redirect url):
action
Syntax action drop
action forward
action forward next-hop [ipv6-address |indirect ipv6-address
action http-redirect url
no action
Context config>filter>ipv6-filter>entry
Description
This command specifies the action to take for packets that match this filter entry. The action keyword
must be entered and a keyword specified in order for the entry to be active.
Multiple action statements entered will overwrite previous actions parameters when defined.
The no form of the command removes the specified action statement. The filter entry is considered
incomplete and hence rendered inactive without the action keyword.
Default drop
Parameters
drop — Specifies packets matching the entry criteria will be dropped.
forward — Specifies packets matching the entry criteria will be forwarded.
7710 SR OS Router Configuration Guide
Adapter(s) running NAT application.
are supported (including q-in-q, BCP, bridged Ethernet in Frame Relay or ATM).Refer to
Common CLI Command Descriptions on page 563
descriptions.
• $IP – Customer's IP address
• $MAC – Customer's MAC address
• $URL – Original requested URL
• $SAP – Customer's SAP
• $SUB – Customer's subscriber identification string"
Values
255 characters maximum
Filter Policies
for SAP CLI command syntax and parameter
The
Page 401