Alcatel-Lucent 7710 SR OS Configuration Manual page 430

Parameters
url
Syntax
Context
Description
Default
Parameters
Page 430
return-code-1, return-code-2 — Specifies a range of return codes. When the URL test return-code
falls within the specified range, the corresponding action is performed.
Values
return-code-1:
return-code-2:
disable — Specifies that the destination may not be used for the amount of time specified in the
hold-time command when the return code falls within the specified range.
lower-priority priority — Specifies the amount to lower the priority of the destination when the
return code falls within the specified range.
raise-priority priority — Specifies the amount to raise the priority of the destination when the return
code falls within the specified range.
url url-string [http-version version-string]
config>filter>redirect-policy>destination>url-test
This command specifies the URL to be probed by the URL test.
none
url-string — Specify a URL up to 255 characters in length.
http-version version-string — Specifies the HTTP version, 80 characters in length.
1 — 4294967294
2 — 4294967295
7710 SR OS Router Configuration Guide