Alcatel-Lucent 7710 SR OS Configuration Manual page 402

filter-sample
Syntax
Context
Description
Default
interface-disable-sample
Syntax
Context
Description
Default
match
Syntax
Context
Description
Page 402
[no] filter-sample
config>filter>ip-filter>entry
config>filter>ipv6-filter>entry
Specifies that traffic matching the associated IP filter entry is sampled if the IP interface is set to
cflowd acl.
If the cflowd is either not enabled or set to cflowd interface mode, this command is ignored.
The no form removes this command for the system configuration, disallowing the sampling of
packets if the ingress interface is in cflowd acl mode.
no filter-sample
[no] interface-disable-sample
config>filter>ip-filter>entry
config>filter>ipv6-filter>entry
Specifies that traffic matching the associated IP filter entry is not sampled if the IP interface is set to
cflowd interface mode. This allows the option to not sample specific types of traffic when interface
sampling is enabled.
If the cflowd is either not enabled or set to cflowd acl mode, this command is ignored.
The no form of this command enables sampling.
no interface-disable-sample
match [protocol protocol-id]
no match
config>filter>ip-filter>entry
This command enables the context to enter match criteria for the filter entry. When the match criteria
have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
7710 SR OS Router Configuration Guide